Single sachet wet wipe machines
These machines are designed to produce individual sachets containing a single wet wipe. This type of machine is frequently used in industries where hygiene and portability are paramount, such as in restaurants, airlines, or healthcare facilities.
Flow pack wet wipe machines
These machines are used to package multiple wipes into one pack. Typically found in baby wipe, cosmetic, and cleaning industries, these machines are ideal for producing bulk products that consumers frequently use.
Canister wet wipe machines
Specifically designed for producing wet wipes that are stored in cylindrical canisters, these machines are common in industrial and healthcare settings, where a large number of wipes are required in a single package.
Pocket wet wipe machines
These machines are used to produce small, portable packs of wet wipes, often seen in convenience products such as facial wipes or personal hygiene wipes.
Do not install the machine in an overheated workshop, the temperature should be less than 40°C, so as to avoid overheating and damaging the electrical parts of the machine or the machine's servo drives, controllers, etc., overheating tripping or unstable performance.
Do not install the machine in a place exposed to direct sunlight or strong light, as the electric eye (photoelectric head) will fail.
Do not put it upside down or hit the machine to avoid damage.
The machine must be installed steadily, and the leveler should be used to correct and adjust the anchor screws to reach the level; Connect according to the requirements of the machine placement drawing, and the connection between the various conveyor platforms of the machine must be firm to prevent unpredictable problems caused by vibration when the machine is running.
Power requirements of this machine: single-phase AC 220 V, single-phase voltage MAX≤238 V, If voltage is unstable, the electrical part of the machine will be unstable, such as frequent trip protection of electrical components, more serious damage to electrical components, etc., if the voltage does not match, it is recommended to use single-phase voltage stabilizer is above 10 KVA. Note: The main power cord of the machine must be connected by a professional. Before powering on, use a multi meter to measure the voltage, check and confirm, otherwise the electrical parts will be damaged! Keep in mind!
|
Power supply |
Three phase 380V,50HZ |
|
Power |
30KW |
|
Designed speed |
1200pcs/min |
|
Product speed |
800-1000pcs/min (80-100packs/min for 10pcs/pack) |
|
Unfolded size of wet tissue(mm) |
(150-200)x(160-200)(LXW) |
|
Folded size of wet tissue(mm) |
(75-100)x(65-75) (LXW) |
|
Suitable raw material |
Single roll spunlace |
|
The size of machine(mm) |
7000X1520X2350（LX W X H |
Pre-sales technical support
Free consultation services to help customers develop an analysis of the project feasibility.
We provide a variety of product information to be used as a reference.
We also supply design drawings, installation drawings and production required information depending on different actual needs.
Customers will be informed of the necessary raw materials that are needed, as well as technical requirements, suppliers and a reference price.
We can give advice on trouble shooting common problems.
Finally, we can also send technicians to finish on-site installation and commissioning.
After-sales service
First, we carry out the commissioning of the wet wipe machine in our company, and the machines will not be shipped until the customer is satisfied.
When customers do the commissioning at their company, our technical staff will train their technicians on both theory and practice until the master the skills needed to operate the machinery.
When our wet tissue equipment arrives at the customer's plant, we can send technicians for on-site installation, commissioning, and training until the machine is in operation.
During the warranty period, if the machine runs into any problems, we will provide a fast solution and help the customer resume the normal production schedule as quickly as possible.
After the warranty period, for maintenance needed within 3 years, we will only charge for the maintenance costs.
Other service terms can be added after discussion.
Packing Details: Standard exporting packing case
As one of the most professional pocket wet tissue machine manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to buy pocket wet tissue machine made in China here from our factory.
DC 2020B Full Automatic Normal Speed 5 30pcs Wet Tissue Folding and Packing Machine, DC 2070A Full Automatic 5 30pcs Wet Tissue Production Line Wipe Dispenser, DC 2070A Pocket Wet Wipe Machine Price(0/10)
